This fun and easy shaker card was made with the Miss Kate Cuttables cut file Halloween Witch Shoe Frame. I will take you step by step and show you how to make this basic shaker card.
You will need a die cutting machine such as a Silhouette or Cricut to make this card.
Open up the file in your favorite editing program. I am using the Cameo 3 by Silhouette.
Size the image to 4inches wide. If you keep the ratio locked, the length will adjust automatically. (aprox. 4.5 inches wide) Cut it out on black paper.
Next weed or clean up the design and take it off the mat. You just made a die cut! Now you can use the die cut as is and mount it on a card or make a fun shaker like I did.
Cut a card that is 4.33 x 5.5 inches. Score at 4.25 and .125 or 1/8 inch to the left of your regular score. This is to allow room for the shaker and so the card folds correctly. Add the decorative paper to the front of your card and die cut a circle in the center. Use a 3.5 inch circle die.
Glue the die cut image over the circle on the front of your card.(I did this step later but you should do it now.) Keep the edges of the circle behind the black border of the die cut. (I accidentally glued it on backwards, it really doesn't matter which way you glue it, it is reversible.)
Using some recycled plastic, glue a piece large enough to cover the hole on the INSIDE of the card as pictured below.
Using some foam tape, begin to add tape around the circle in the inside of the card front over the hole. Keep the foam on the card and not on the hole itself. I wanted my items to shake around freely so I doubled up on my foam. I also went around the inside of my foam with a powder tool to remove any tackiness so my shaker pieces would not stick to the adhesive.
Now the fun part! Fill your shaker with all kinds of goodies. I used sequins, plastic balls and beads. You can use tiny punches, pearls, sand or any other tiny items you want to "shake" around in your card front.
Remove the backing from the foam and add a piece of 4.25 x 5.5 piece of cardstock. I used purple. Use a color to match your patterned paper.The shaker card is finished. Now to decorate the front a bit. I used a die cut sentiment and cut it several times from the purple paper and layered them together to give me a thick die cut word. I glued it on the lower right hand side of the card and I was finished.....
So I thought.....
I decided to play a bit more and added the shaker to a 5.5 x 8.5 inch card. I added some black paper for the base, a purple embossed piece for the second layer and some die cuts from Miss Kate Cuttables (Spiderweb Set). I used the card for my shaker element and added a few little pieces from the shaker for some color. For fun I added a spider with google eyes!
Hope you enjoyed all the ideas and die cuts from Miss Kate Cuttables!
Happy Crafting!
Jen from Jen's Crafty Place
